Qualube Endurol 15W40
is recommended for your DETROIT DIESEL
Recommendations for your DETROIT DIESEL
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Engine (DT)
Recommendation
Product 1
Qualube Endurol 15W40
Product 2
Qualube Eurofleet 15W40
Product 3
Qualube Extremol 15W40
Capacity
39.5 - 43.5 (ltr)
Notes
- a. Outside USA oils meeting; E2-96, E3-96 or E5-99 and CG-4, CH-4 or CI-4 (preferred) may also be used prior to Jan 2007 (EPA04). Oils of lower performance may only be used at a 50% oil drain interval reduction
- See Detroit Diesel Corporation Bulletin 7SE270 9706, 'Lubricating Oil, Fuel Oil and Filter Recommendations', for additional information on alternative lubricant requirements (DDC/MTU Series 2000/4000 only refer to Engine Service Fluid and Filter Requirements Publication 7SE273 9903). Synthetic oils may be used if API licensed and meet Detroit Diesel requirements. Must not contain VI improvers for 2-stroke engines
- Fuel sulphur content above 0.5% may require higher alkalinity oils and reduced drain intervals. Low zinc, high TBN Marine/Industrial lubricants are recommended for marine and railroad applications of Series 149 and other 2-stroke engines where sulphur content exceeds 0.5%
- Natural gas operation: See Bulletin 7SE272 for details.
Coolant
Recommendation
Product 1
Qualube Qualguard ORATEC Coolant
Capacity
70.0 (ltr)
Notes
- b. Mix ratio, 50% >-37°C
- See Detroit Diesel Corporation Bulletin 7SE270 9706, 'Lubricating Oil, Fuel Oil and Filter Recommendations', for additional information on alternative lubricant requirements (DDC/MTU Series 2000/4000 only refer to Engine Service Fluid and Filter Requirements Publication 7SE273 9903). Synthetic oils may be used if API licensed and meet Detroit Diesel requirements. Must not contain VI improvers for 2-stroke engines
- Fuel sulphur content above 0.5% may require higher alkalinity oils and reduced drain intervals. Low zinc, high TBN Marine/Industrial lubricants are recommended for marine and railroad applications of Series 149 and other 2-stroke engines where sulphur content exceeds 0.5%
- Natural gas operation: See Bulletin 7SE272 for details.
Oil Change Intervals
Engine (DT)
| Miles Min | 10000 |
| Miles Max | 25000 |
Coolant
| Miles Max | 600000 |
| Months Max | 48 |
| Hours Max | 10000 |