Witham Oil & Paint

Application	Recommendation	Capacity (ltr)
Engine (DT)	Product 1	Qualube Endurol 15W40 (a)	39.5 - 43.5
Product 2	Qualube Eurofleet 15W40
Product 3	Qualube Extremol 15W40
Coolant	Qualube Qualguard ORATEC Coolant (b)	70.0

a.	Outside USA oils meeting; E2-96, E3-96 or E5-99 and CG-4, CH-4 or CI-4 (preferred) may also be used prior to Jan 2007 (EPA04). Oils of lower performance may only be used at a 50% oil drain interval reduction
b.	Mix ratio, 50% >-37°C

1.	See Detroit Diesel Corporation Bulletin 7SE270 9706, 'Lubricating Oil, Fuel Oil and Filter Recommendations', for additional information on alternative lubricant requirements (DDC/MTU Series 2000/4000 only refer to Engine Service Fluid and Filter Requirements Publication 7SE273 9903). Synthetic oils may be used if API licensed and meet Detroit Diesel requirements. Must not contain VI improvers for 2-stroke engines
2.	Fuel sulphur content above 0.5% may require higher alkalinity oils and reduced drain intervals. Low zinc, high TBN Marine/Industrial lubricants are recommended for marine and railroad applications of Series 149 and other 2-stroke engines where sulphur content exceeds 0.5%
3.	Natural gas operation: See Bulletin 7SE272 for details.

Miles Min	10000
Miles Max	25000