Close Print
Application
Recommendation
Capacity (ltr)
Engine (P) (Engine Code: E5FA)
Qualsyn MS FS 5W20 ECO
4.0
Engine (P) (Engine Code: E5FC)
Qualsyn MS FS 5W20 ECO (a)
4.0
Transmission (Manual) (Code: MT75 & Engine Code: E5FA)
Qualube Syntogear FS TDL 75W90
1.3
Transmission (Manual) (Code: MT75 & Engine Code: E5FC)
Qualube Syntogear FS TDL 75W90
1.7
Gearbox hydraulic control
Contact with our Technical Team
Transmission (Manual) (Code: MT82)
Contact with our Technical Team
2.3
Transmission (Manual) (Code: VXT75)
Qualube Syntogear FS TDL 75W90
2.25
Differential - rear
Contact with our Technical Team
2.6 / 3.0 (b, c)
Coolant (Engine Code: E5FA)
Qualube Qualguard ORATEC Coolant (e)
7.8 / 10.1 (d)
Coolant (Engine Code: E5FC)
Qualube Qualguard ORATEC Coolant (j)
10.0 / 11.5 / 12.8 / 13.0 (f, g, h, i)
Brake system (Engine Code: E5FA)
Product 1
Qualube Brake Fluid DOT4 (k)
1.0
Product 2
Qualube Brake Fluid DOT5.1
Brake system (Engine Code: E5FC)
Qualube Brake Fluid DOT4 (l)
1.0
Power Steering
Qualube FS ATF MF (m)
1.0
Air conditioning
 
(n, o, p)
Compressor
Contact with our Technical Team

Lubricant / Capacity Notes

a. Alternative recommendations: Qualsyn MS FS 5W30 FSF
b. Axle code A/B/C/D/G/M/P/X/Y (refer to Identification), 2.6 litres
c. Axle code E/F/H/J/K/L/R (refer to Identification), 3.0 litres
d. With rear heater, 10.1 litres
e. De-ionised water with 40% anti-freeze & >-25°C
f. With fuel burning heater and additional heater, 13.0 litres
g. With auxiliary heating, 12.8 litres
h. With fuel fired heater, 11.5 litres
i. With front heater, 10.0 litres
j. De-ionised water with 40% anti-freeze & >-25°C
k. Alternative recommendations: Qualube Brake Fluid DOT4 / Qualube Brake Fluid DOT5.1
l. Alternative recommendations: Contact with our Technical Team
m. Red fluid
n. Without auxiliary air-conditioning unit, 970 - 1,010 g
o. With auxiliary air-conditioning unit, 1,666 - 1,734 g
p. With refrigeration unit, 2,600 - 2,700 g

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model