Close Print
Application
Recommendation
Capacity (ltr)
Engine (D / DT)
Product 1
Qualube Endurol 15W40 (a)
30.0
Product 2
Qualube Extremol 15W40
Product 3
Qualube Extremol 10W40
Transmission
Qualube Hi-Q-4 30
30.0
Coolant
Qualube Qualguard ORATEC Coolant
43.0
Hydraulics (Reservoir/System)
Product 1
Qualube Eurofleet 10 (b, c, d, e, f, g)
76.0 / 91.0
Product 2
Qualube Hi-Q-4 10
Front Differential & Final Drive
Qualube Hi-Q-4 30 (h, i, j)
24.0
Rear Differential & Reduction Hubs
Qualube Hi-Q-4 30 (k, l, m)
27.0

Lubricant / Capacity Notes

a. Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b. Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c. -20°C to 40°C
d. Alternative recommendations, -20°C to 40°C: Qualube Hi-Q-4 10; Qualube Extremol FS 10W30 / Qualube Supremol 5W30
e. Alternative recommendations, -15°C to 50°C: Qualube Hi-Q-4 30
f. Alternative recommendations, -5°C to 45°C: Contact with our Technical Team
g. Alternative recommendations, 0°C to 50°C: Contact with our Technical Team
h. Alternative recommendations, -25°C to 15°C: Qualube Hi-Q-4 10
i. Alternative recommendations, -20°C to 43°C: Qualube Hi-Q-4 30
j. Alternative recommendations, 10°C to 50°C: Qualube Hi-Q-4 50
k. Alternative recommendations, -25°C to 15°C: Qualube Hi-Q-4 10
l. Alternative recommendations, -20°C to 43°C: Qualube Hi-Q-4 30
m. Alternative recommendations, 10°C to 50°C: Qualube Hi-Q-4 50

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (D / DT)
Hours Max 250
Transmission
Months Max 6
Hours Max 1000
Coolant
Months Max 12
Hours Max 2000
Hydraulics (Reservoir/System)
Months Max 18
Hours Max 3000
Front Differential & Final Drive
Months Max 5
Hours Max 1000
Rear Differential & Reduction Hubs
Months Max 5
Hours Max 1000