Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT) (Cat 3116T)
Product 1
 Qualube Endurol 15W40 (a)
20.5
Product 2
 Qualube Extremol 15W40
Product 3
 Qualube Extremol 10W40
Transmission
From Hydraulics
Coolant
Qualube Qualguard ORATEC Coolant
25.0 / 31.5
Hydraulics
Product 1
 Qualube Eurofleet 10 (b, c, d, e, f, g)
210 / 270
Product 2
 Qualube Hi-Q-4 10
Final Drives (each)
Qualube Hi-Q-4 50 (h, i, j, k, l)
20.0
Greases: Molybdenum
Qualube Lithium Complex Moly EP2M
Greases: Multipurpose
Qualube Lithium Complex 2
Greases: Special Purpose (high temp. antifriction bearings)
Contact with our Technical Team

Lubricant / Capacity Notes

a. Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b. Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c. -20°C to 40°C
d. Alternative recommendations, -20°C to 40°C: Qualube Hi-Q-4 10; Qualube Extremol FS 10W30 / Qualube Supremol 5W30
e. Alternative recommendations, -15°C to 50°C: Qualube Hi-Q-4 30
f. Alternative recommendations, -5°C to 45°C: Contact with our Technical Team
g. Alternative recommendations, 0°C to 50°C: Contact with our Technical Team
h. -15°C to 50°C
i. Alternative recommendations, -30°C to 25°C: Qualube Hi-Q-4 30
j. Alternative recommendations, -30°C to 0°C: Qualube Hi-Q-4 10
k. Alternative recommendations, -25°C to 25°C: Qualube Hi-Q-4 30
l. Alternative recommendations, -15°C to 50°C: Qualube Hi-Q-4 50

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (DT) (Cat 3116T)
Hours Max 500
Hydraulics
Months Max 18
Hours Max 3000
Final Drives (each)
Months Max 12
Hours Max 2000

Copyright © OATS Ltd. 2024