Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D / DT)
|
Product 1
|
Qualube Endurol 15W40 (a, b) |
26.0
|
Product 2 |
Qualube Extremol 15W40 | ||
Product 3 |
Qualube Extremol 10W40 | ||
|
Transmission
|
Qualube Hi-Q-4 30 |
57.0
|
|
|
Final Drives (each)
|
Qualube Hi-Q-4 30 (c) |
209
|
|
|
Coolant
|
Qualube Qualguard ORATEC Coolant (d) |
42.0 / 58.0
|
|
|
Hydraulics
|
Qualube Eurofleet 10 (e) |
110
|
|
|
Front Idler Hubs
|
Qualube Hi-Q-4 30 |
|
|
|
Greases: Molybdenum
|
Qualube Lithium Complex Moly EP2M |
|
|
|
Greases: Multipurpose
|
Qualube Lithium Complex 2 |
|
|
|
Greases: Special Purpose (high temp. antifriction bearings)
|
Contact with our Technical Team |
|
|
|
Midroller hubs
|
Qualube Hi-Q-4 30 |
|
|
|
Pivot joint (where fitted)
|
Product 1
|
Qualube HD EP 80W90 |
|
Product 2 |
Qualube Syntogear TDL 80W90 | ||
Product 3 |
Qualube LS HD EP 80W90 | ||
|
Steering control mechanism (where fitted)
|
Qualube Eurofleet 10 |
|
|
|
Winch (where fitted)
|
Qualube Hi-Q-4 30 |
|
|
| a. | Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines |
| b. | Alternative recommendations, -20°C to 40°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Supremol 5W30 |
| c. | Factory fill viscosity: 30 |
| d. | Mix ratio, 50% |
| e. | Alternative recommendations, Hydraulics/hydrostatic system: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Agri - Supreme 10W30; Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Endurasyn SS 10W-40 |
There are no notes to display for this model
| Hours Max | 250 |
| Hours Max | 1000 |
| Hours Max | 1000 |
| Hours Max | 3000 |
| Hours Max | 1000 |
Copyright © OATS Ltd. 2024