Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Hydraulic System
|
Product 1
|
Qualube Hydraulic HM46 (a, b, c, d, e, f, g, h, i) |
|
Product 2 |
Qualube Hydrapower HV46 | ||
| a. | Manufacturer specifies mineral oils to DIN 51524 Part 1 or 2 but preference is for type HL-P oils. Viscosity should be in the range 20 cSt to 160 cSt at operating temperature with a maximum on start up of 1000 cSt. Recommended viscosity for continuous fluid operating temperature at or below 70°C, 40 cSt |
| b. | 17°C to 62°C |
| c. | Alternative recommendations, -4°C to 33°C: Qualube Hydraulic HM15 / Qualube Hydrapower HV15 |
| d. | Alternative recommendations, 4°C to 43°C: Qualube Hydraulic HM22 / Qualube Hydrapower HV22 |
| e. | Alternative recommendations, 11°C to 52°C: Qualube Hydraulic HM32 / Qualube Hydrapower HV32; Contact with our Technical Team |
| f. | Alternative recommendations, 17°C to 62°C: Contact with our Technical Team |
| g. | Alternative recommendations, 23°C to 70°C: Qualube Hydraulic HM68 / Qualube Hydrapower HV68; Contact with our Technical Team |
| h. | Alternative recommendations, 33°C to 80°C: Qualube Hydraulic HM100 / Qualube Hydrapower HV100 |
| i. | Alternative recommendations, 37°C to 90°C: Qualube Hydraulic HM150 / Qualube Hydrapower HV150 |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024