Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Hydraulics
|
Qualube Hydraulic HM46 (a, b, c, d, e, f, g, h) |
|
|
| a. | Viscosity limits: Max. at cold start: piston 7500 SUS (1618 cSt) , vane 4000 SUS (862cSt). Max. at full power: piston 750 SUS (162 cSt), vane 500 SUS (108 cSt). Piston and vane: optimum at operating temperature 140 SUS (30 cSt); minimum at full power 60 SUS (10 cSt). Recommended VI 90 min |
| b. | Some fluids meeting these specifications need pump ratings to be adjusted and have special seal compatibility requirements - see OATS code list and manufacturers recommendations. HY DEN SK 32032 biodegradable fluids can be used in Denison pumps. Rapeseed based oils should not be used below -20°C |
| c. | 42°C to 83°C |
| d. | Alternative recommendations, 15°C to 53°C: Contact with our Technical Team |
| e. | Alternative recommendations, 24°C to 63°C: Contact with our Technical Team |
| f. | Alternative recommendations, 33°C to 73°C: Qualube Hydraulic HM32 / Qualube Hydrapower HV32 |
| g. | Alternative recommendations, 50°C to 93°C: Qualube Hydraulic HM68 / Qualube Hydrapower HV68 |
| h. | Alternative recommendations, 57°C to 95°C: Contact with our Technical Team |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024