Qualube Hydraulic HM46
is recommended for your DENISON HYDRAULICS
Recommendations for your DENISON HYDRAULICS
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Hydraulics
Recommendation
Product 1
Qualube Hydraulic HM46
Notes
- a. Viscosity limits: Max. at cold start: piston 7500 SUS (1618 cSt) , vane 4000 SUS (862cSt). Max. at full power: piston 750 SUS (162 cSt), vane 500 SUS (108 cSt). Piston and vane: optimum at operating temperature 140 SUS (30 cSt); minimum at full power 60 SUS (10 cSt). Recommended VI 90 min
- b. Some fluids meeting these specifications need pump ratings to be adjusted and have special seal compatibility requirements - see OATS code list and manufacturers recommendations. HY DEN SK 32032 biodegradable fluids can be used in Denison pumps. Rapeseed based oils should not be used below -20°C
- c. 42°C to 83°C
- d. Alternative recommendations, 15°C to 53°C: Contact with our Technical Team
- e. Alternative recommendations, 24°C to 63°C: Contact with our Technical Team
- f. Alternative recommendations, 33°C to 73°C: Qualube Hydraulic HM32 / Qualube Hydrapower HV32
- g. Alternative recommendations, 50°C to 93°C: Qualube Hydraulic HM68 / Qualube Hydrapower HV68
- h. Alternative recommendations, 57°C to 95°C: Contact with our Technical Team
Oil Change Intervals
There is no Oil Change Interval data to display for this model