Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Hydraulic System
|
Product 1
|
Qualube Hydraulic HM46 (b) |
2,120
(a)
|
Product 2 |
Qualube Hydrapower HV46 | ||
|
Grease Fittings
|
Product 1
|
Qualube Lithium EP 2 |
|
Product 2 |
Qualube Lithium Complex 2 | ||
|
Cutter assemblies
|
(c) |
1.0
(a)
|
|
|
Exposed steel & adjusting screws
|
Product 1
|
Qualube FS PAO MEP 220 (d) |
|
Product 2 |
Qualube MEP 220 | ||
|
Flushing hydraulic system
|
Product 1
|
Qualube Hydraulic HM32 |
(e)
|
Product 2 |
Qualube Hydrapower HV32 | ||
|
Lubrication
|
Product 1
|
Qualube FS PAO MEP 220 (b) |
397
(a)
|
Product 2 |
Qualube MEP 220 | ||
|
Reduction Gears
|
Product 1
|
Qualube FS PAO MEP 320 (b) |
18.8
(a)
|
Product 2 |
Qualube MEP 320 | ||
|
Snubber pulley assemblies
|
Product 1
|
Qualube FS PAO MEP 220 (f) |
15.0
(a)
|
Product 2 |
Qualube MEP 220 | ||
|
Tail pulley assembly
|
Product 1
|
Qualube FS PAO MEP 220 (f) |
11.3
(a)
|
Product 2 |
Qualube MEP 220 | ||
| a. | Typical capacity, individual machines may vary |
| b. | Analyze oil sample every 500 hours to determine change interval. Drain, clean and refill twice yearly, depending on severity of operating conditions |
| c. | Approved oils: Shell Omala 220 or Mobilgear 630. Approved grease: Mobil Temp 78. Otherwise, refer to manufacturer. Oil is replaced at each cutter ring replacement |
| d. | Alternative recommendations: Qualube Hydraulic HM46 / Qualube Hydrapower HV46 |
| e. | As required |
| f. | Replace at unit rebuild |
There are no notes to display for this model
| Months Max | 6 |
| Hours Max | 40 |
| Months Max | 6 |
| Months Max | 6 |
Copyright © OATS Ltd. 2024