Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT)
|
Product 1
|
Qualube Endurol 15W40 (a, b, c, d, e) |
35.0
|
Product 2 |
Qualube Extremol 10W40 | ||
Product 3 |
Qualube Endurasyn SS 10W-40 | ||
|
Transmission
|
Product 1
|
Qualube Endurol 15W40 (f) |
12.0 / 13.0
|
Product 2 |
Qualube Eurofleet 40 | ||
|
Differential
|
Product 1
|
Qualube Syntogear SA 75W-140 (g, h) |
|
Product 2 |
Qualube HD EP 85W140 | ||
|
Clutch Fluid
|
Product 1
|
Qualube Brake Fluid DOT4 |
|
Product 2 |
Qualube Brake Fluid DOT5.1 | ||
|
Power Steering
|
Product 1
|
Qualube ATF Type D |
|
Product 2 |
Qualube ATF Type D3 | ||
Product 3 |
Qualube FS ATF MF | ||
|
Chassis Grease
|
Product 1
|
Qualube Lithium EP 2 |
|
Product 2 |
Qualube Lithium Complex 2 | ||
| a. | Alternative recommendations, Synthetic, -40°C to 30°C: Contact with our Technical Team |
| b. | Alternative recommendations, -40°C to 50°C: Contact with our Technical Team |
| c. | Alternative recommendations, -20°C to 50°C: Qualube Extremol 10W40 / Qualube Endurasyn SS 10W-40 / Qualube Extendol 10W40 |
| d. | Alternative recommendations, -20°C to 30°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 |
| e. | Alternative recommendations, -15°C to 50°C: Qualube Endurol 15W40 / Qualube Extremol 10W40 / Qualube Endurasyn SS 10W-40 |
| f. | Volvo transmissions viscosity options: -20°C to 30°C without heat exchanger (-20°C to 45°C with heat exchanger), 40; -25°C to 0°C, 30. Heat exchangers are recommended for temperatures consistently above 32°C or below -25°C |
| g. | Volvo VBT 4018, 4618, 5218 and all other drive axles alternative oil specifications: GL-5/MIL-PRF-2105E |
| h. | Volvo drive axle oil viscosity options: -34°C to 29°C, 90; -34°C to 44°C, 80W-140; 10°C to 44°C, 85W-140; 0°C to 49°C, 140. 80W-90 must not be used |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024