Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT) (Caterpillar)
Contact with our Technical Team
Engine (D / DT) (Cummins [D / DT])
Contact with our Technical Team (a)
Engine (D / DT) (Detroit Diesel [D / DT])
Contact with our Technical Team (b)
Transmission (Allison)
Contact with our Technical Team
38.0 / 45.0
Transmission (Fuller)
Contact with our Technical Team (c, d)
14.2 / 17.0
Transmission (Meritor)
Contact with our Technical Team (e, f, g)
8.5 / 9.5
Differential (Eaton)
Contact with our Technical Team (h)
18.9 / 22.7
Coolant
Contact with our Technical Team (i, j)
43.5 / 56.0
Power Steering Gear
Contact with our Technical Team
Steering Gear (manual) (TRW)
Contact with our Technical Team
Grease Points
Contact with our Technical Team

Lubricant / Capacity Notes

a. Engine, Cummins EGR, Contact with our Technical Team
b. From 2002 on, only PGOS 93K214 oils are approved for EGR fitted Detroit & MBE engines
c. Alternative recommendations, Transmission, Eaton/Fuller, <-12°C: Contact with our Technical Team
d. Alternative recommendations, Transmission, Eaton/Fuller, >-12°C: Contact with our Technical Team
e. Alternative recommendations, Transmission, Meritor: Contact with our Technical Team
f. Alternative recommendations, Transmission, Meritor, >-26°C: Contact with our Technical Team
g. Alternative recommendations, Transmission, Meritor, >-12°C: Contact with our Technical Team
h. Viscosity options for Eaton (Dana) axles using mineral oils: above -40°C to -26°C, 75W; -40°C to 21°C, 75W-80; -40°C to 38°C, 75W-90/80W-90; above -40°C, 75W-140/80W-140/85W-140: using full synthetic: above -40°C, Contact with our Technical Team/Contact with our Technical Team
i. Alternative recommendations, Caterpillar: Contact with our Technical Team
j. Alternative recommendations, Detroit Diesel / MBE 4000: Contact with our Technical Team

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model