Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (EN590/D975 <15ppm)
|
(a, b, c) |
|
|
| a. | Catalyst equipped gas engines require oils with sulphated ash limit 0.5%, zinc 0.04% and phosphorous 0.09% by weight |
| b. | Manufacturer recommends: Esso HPC 40 for 2000 hour service interval; other low ash oils, 1000 hour service intervals |
| c. | Alternative viscosity recommendations for gas engines below 30°C: SAE 30 where engine start-up problems are probable |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2025