is recommended for your PERKINS
Recommendations for your PERKINS
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Engine (EN590/D975 <15ppm)
Recommendation
Notes
- a. Catalyst equipped gas engines require oils with sulphated ash limit 0.5%, zinc 0.04% and phosphorous 0.09% by weight
- b. Manufacturer recommends: Esso HPC 40 for 2000 hour service interval; other low ash oils, 1000 hour service intervals
- c. Alternative viscosity recommendations for gas engines below 30°C: SAE 30 where engine start-up problems are probable
Oil Change Intervals
There is no Oil Change Interval data to display for this model