Close Print
Application
Recommendation
Capacity (ltr)
Engine (D) (Engine Code: AUY)
Motul Specific 505 01 502 5W-40 (a, b)
4.3
Engine (D) (Engine Code: BVK)
Contact with our Technical Team (c)
4.3
Haldex coupling
Contact with our Technical Team
0.25 / 0.42 (d, e)
Transmission (Automatic) (Engine Code: AUY)
Contact with our Technical Team
2.5 / 7.0 (f, g)
Transmission (Automatic) (Engine Code: BVK)
Qualube FS ATF MF
3.5
Transmission (Manual)
Contact with our Technical Team
2.8
Differential
Qualube Syntogear FS TDL 75W90
1.0
Differential - rear
Qualube Syntogear FS TDL 75W90
1.0
Coolant
Qualube Qualguard ORATEC Coolant (k, l, m)
6.8 / 8.6 / 9.2 (h, i, j)
Brake system
Product 1
Qualube Brake Fluid DOT4
1.0
Product 2
Qualube Brake Fluid DOT5.1
Power Steering
Contact with our Technical Team
1.0
Grease points (Chassis)
Product 1
Qualube Lithium EP 2
Product 2
Qualube Lithium Complex 2
Grease points (Constant velocity joints)
Product 1
Qualube Lithium Complex Moly EP2M
Product 2
Qualube Pin & Bush Grease
Product 3
Qualube LM2 Grease
Air conditioning
 
(n)
Compressor
Contact with our Technical Team
Fuel additive
Contact with our Technical Team

Lubricant / Capacity Notes

a. All temperatures
b. Alternative recommendations, All temperatures: Qualsyn MS FS 5W30 C3
c. Alternative recommendations: Contact with our Technical Team
d. Haldex coupling refill, 0.25 litres
e. Haldex coupling refill after overhaul, 0.42 litres
f. Gearbox refill, 2.5 litres
g. Gearbox refill after overhaul, 7.0 litres
h. Without additional heater, 6.8 litres
i. With additional heater, 8.6 litres
j. With additional heater and preheater, 9.2 litres
k. De-ionised water with 60% anti-freeze & >-40°C
l. Alternative recommendations, De-ionised water with 40% anti-freeze, >-25°C: Qualube Qualguard ORATEC Coolant
m. Alternative recommendations, De-ionised water with 50% anti-freeze, >-35°C: Qualube Qualguard ORATEC Coolant
n. With two evaporators, 925 - 975 g

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model