Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (P)
|
Qualsyn PCMO FS 5W40 (a) |
4.9 / 5.1
|
|
|
Transfer Box
|
Product 1
|
Qualube HD EP 90 |
0.6
|
Product 2 |
Qualube HD EP 80W90 | ||
Product 3 |
Qualube Syntogear TDL 80W90 | ||
|
Transmission (Manual)
|
Product 1
|
Qualube SS 75W90 (b, c) |
2.8
|
Product 2 |
Qualube Syntogear FS TDL 75W90 | ||
Product 3 |
Qualube Syntogear SG 75W-90 | ||
|
Differential - Front
|
Product 1
|
Qualube HD EP 90 (d, e) |
0.4 / 0.6
|
Product 2 |
Qualube HD EP 80W90 | ||
Product 3 |
Qualube Syntogear TDL 80W90 | ||
|
Coolant
|
Product 1
|
Qualube Qualguard Si-OAT Coolant (f) |
6.0 - 9.5
|
Product 2 |
Qualube Universal Antifreeze | ||
Product 3 |
Qualube Qualguard ORATEC Coolant | ||
|
Clutch Fluid
|
Product 1
|
Qualube Brake Fluid DOT4 |
|
Product 2 |
Qualube Brake Fluid DOT5.1 | ||
|
Power Steering
|
Product 1
|
Qualube ATF Type D |
|
Product 2 |
Qualube FS ATF MF | ||
|
Wheel Bearings
|
Product 1
|
Qualube Lithium EP 2 |
|
Product 2 |
Qualube Lithium Complex 2 | ||
| a. | First-fill is a mineral oil. At first oil change (600 miles) semi-synthetic recommended, at second oil change (4500 miles) and thereafter fully synthetic oil should be used. Viscosity options: below 10°C, 5W-40; -25°C to 40°C, 10W-40; above -25°C, 10W-40, 10W-50; above -15°C 15W-40, 15W-50; above -10°C, 20W-50, 20W-40 |
| b. | Active Yaw Control (AYC) if fitted, Mitsubishi grades specified: torque transfer (clutches), Contact with our Technical Team; hydraulic unit reservoir, Contact with our Technical Team. For Active centre differential if fitted Qualube LS HD EP 90 / Qualube LS HD EP 80W90 |
| c. | Alternative recommendations: Qualube SS 75W90 / Qualube Syntogear FS TDL 75W90 |
| d. | >10°C |
| e. | Alternative recommendations, <10°C: Qualube HD EP 80 |
| f. | Mix ratio, 30% |
There are no notes to display for this model
| Miles Max | 4500 |
| Months Max | 6 |
Copyright © OATS Ltd. 2024