Close Print
Application
Recommendation
Capacity (ltr)
Engine (P)
Motul 8100 X-Cess 5W-40 (a, b, c)
8.5
Transmission (Automatic)
Qualube FS ATF MF (d)
9.0
Differential - rear (Code: 215FE)
Qualube Syntogear TDL 80W90 (e, f)
1.2
Differential - rear (Code: 187FE)
Qualube Syntogear TDL 80W90 (g, h)
0.95
Differential - rear (Code: 200FE)
Qualube Syntogear TDL 80W90 (i, j)
1.1
Coolant
Product 1
Qualube Qualguard ORATEC Coolant (m, n, o)
2.2 / 10.9 (k, l)
Product 2
Qualube Qualguard HD5X Coolant
Brake system
Qualube Brake Fluid DOT4
0.5
Power Steering
Contact with our Technical Team
0.8
Air conditioning
 
Compressor
Contact with our Technical Team

Lubricant / Capacity Notes

a. >-25°C
b. Alternative recommendations, All temperatures: Contact with our Technical Team
c. Alternative recommendations, >-25°C: Contact with our Technical Team
d. Alternative recommendations: Qualube FS ATF MF
e. Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team
f. Alternative recommendations: Contact with our Technical Team; Qualube Syntogear TDL 80W90; Qualube HD EP 90 / Qualube Syntogear TDL 80W90
g. Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team
h. Alternative recommendations: Contact with our Technical Team; Qualube Syntogear TDL 80W90; Qualube HD EP 90 / Qualube Syntogear TDL 80W90
i. Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team
j. Alternative recommendations: Contact with our Technical Team; Qualube Syntogear TDL 80W90; Qualube HD EP 90 / Qualube Syntogear TDL 80W90
k. Main circuit, 10.9 litres
l. Low-temperature circuit, 2.2 litres
m. De-ionised water with 55% anti-freeze & >-45°C
n. Alternative recommendations, De-ionised water with 50% anti-freeze, >-37°C: Qualube Qualguard ORATEC Coolant / Qualube Qualguard HD5X Coolant
o. Alternative recommendations, >-37°C: Qualube Qualguard ORATEC Coolant

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model