Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D)
(Without Diesel Particulate Filter)
|
Qualsyn MS FS 5W30 C3 (a, b, c, d, e, f) |
6.5
|
|
|
Engine (D)
(With Diesel Particulate Filter)
|
Product 1
|
Qualsyn MS FS 5W30 C3 (g, h, i) |
6.5
|
Product 2 |
Qualsyn MS FS 5W30 VAG | ||
|
Transmission (Automatic)
|
Qualube FS ATF MF |
|
|
|
Transmission (Semi-automatic)
|
1.5
(j)
|
||
|
Differential - rear
|
Qualube Syntogear TDL 80W90 (p, q) |
0.95 / 1.1 / 1.2 / 1.6
(k, l, m, n, o)
|
|
|
Coolant
|
Product 1
|
Qualube Qualguard ORATEC Coolant (r, s) |
|
Product 2 |
Qualube Qualguard HD5X Coolant | ||
|
Brake system
|
Qualube Brake Fluid DOT4 |
1.4 - 2.25
|
|
|
Power Steering
|
Contact with our Technical Team |
1.1
|
|
|
Gearbox hydraulic control
|
Contact with our Technical Team |
0.5
|
|
|
Air conditioning
|
|
||
|
Compressor
|
Contact with our Technical Team (t, u) |
|
|
| a. | Using fuel with a low sulphur content & >-25°C |
| b. | Alternative recommendations, All temperatures & using fuel with a low sulphur content: Contact with our Technical Team |
| c. | Alternative recommendations, All temperatures: Contact with our Technical Team |
| d. | Alternative recommendations, Using fuel with a low sulphur content, >-25°C: Qualsyn MS FS 5W30 C3 / Qualsyn MS FS 5W30 VAG; Qualsyn MS FS 5W30 C3; Contact with our Technical Team |
| e. | Alternative recommendations, >-25°C: Contact with our Technical Team; Qualsyn PCMO FS 5W30; Motul 8100 X-Cess 5W-40; Qualsyn PCMO FS 5W40 |
| f. | Alternative recommendations, >-20°C: Qualsyn PCMO FS 5W40 |
| g. | Using fuel with a low sulphur content & >-25°C |
| h. | Alternative recommendations, All temperatures & using fuel with a low sulphur content: Contact with our Technical Team |
| i. | Alternative recommendations, Using fuel with a low sulphur content, >-25°C: Qualsyn MS FS 5W30 C3; Contact with our Technical Team |
| j. | Filled for life, 1.5 litres |
| k. | Assembly diameter 198 mm, 1.1 litres |
| l. | Assembly diameter 210 mm, 1.6 litres |
| m. | Assembly diameter 200 mm, 1.1 litres |
| n. | Assembly diameter 215 mm, 1.2 litres |
| o. | Assembly diameter 187 mm, 0.95 litres |
| p. | Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team |
| q. | Alternative recommendations: Contact with our Technical Team; Qualube HD EP 90 / Qualube Syntogear TDL 80W90 |
| r. | De-ionised water with 50% anti-freeze & >-37°C |
| s. | Alternative recommendations, >-37°C: Qualube Qualguard ORATEC Coolant |
| t. | Bock/Bitzer |
| u. | Alternative recommendations, Except Bock/Bitzer: Contact with our Technical Team |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024