Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D)
|
Qualsyn MS FS 5W30 C3 (a, b, c, d, e, f, g) |
9.5
|
|
|
Transfer box
|
Contact with our Technical Team |
2.8
|
|
|
Transmission (Automatic)
|
Qualube FS ATF MF (h) |
8.0
|
|
|
Differential - front
|
Qualube Syntogear TDL 80W90 (i) |
1.4
|
|
|
Differential - rear
|
Qualube Syntogear TDL 80W90 (j) |
1.8
|
|
|
Coolant
|
Product 1
|
Qualube Qualguard ORATEC Coolant (m, n, o) |
14.7 / 15.3
(k, l)
|
Product 2 |
Qualube Qualguard HD5X Coolant | ||
|
Brake system
|
Qualube Brake Fluid DOT4 |
0.6 - 0.83
|
|
|
Power Steering
|
Qualube FS ATF MF |
1.0
|
|
|
Grease (suspension)
|
Contact with our Technical Team (p) |
|
|
|
Propeller shaft
|
Contact with our Technical Team |
|
|
|
Air conditioning
|
|
||
|
Compressor
|
Contact with our Technical Team (q, r) |
|
|
| a. | Using fuel with a low sulphur content & >-25°C |
| b. | Alternative recommendations, All temperatures & using fuel with a low sulphur content: Contact with our Technical Team |
| c. | Alternative recommendations, All temperatures: Contact with our Technical Team |
| d. | Alternative recommendations, Using fuel with a low sulphur content, >-25°C: Contact with our Technical Team; Qualsyn MS FS 5W30 C3 / Qualsyn MS FS 5W30 VAG; Qualsyn MS FS 5W30 C3 |
| e. | Alternative recommendations, >-25°C: Contact with our Technical Team; Motul 8100 X-Cess 5W-40; Qualsyn PCMO FS 5W30; Qualsyn PCMO FS 5W40 |
| f. | Alternative recommendations, >-20°C: Qualsyn PCMO FS 5W40; Contact with our Technical Team; Qualsyn PCMO FS 5W40 / Qualsyn PCMO SS 10W40 |
| g. | Alternative recommendations, >-15°C: Qualsyn PCMO SS 10W40 |
| h. | Red |
| i. | Alternative recommendations: Qualube HD EP 90 / Qualube Syntogear TDL 80W90 |
| j. | Alternative recommendations: Qualube HD EP 90 / Qualube Syntogear TDL 80W90 |
| k. | With additional heater, 15.3 litres |
| l. | Without additional heater, 14.7 litres |
| m. | De-ionised water with 50% anti-freeze & >-37°C |
| n. | Alternative recommendations, De-ionised water with 50% anti-freeze, >-37°C: Qualube Qualguard Si-OAT Coolant |
| o. | Alternative recommendations, >-37°C: Qualube Qualguard ORATEC Coolant; Contact with our Technical Team |
| p. | Swivel pin housing |
| q. | Bock/Bitzer |
| r. | Alternative recommendations, Except Bock/Bitzer: Contact with our Technical Team |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024