Close Print
Application
Recommendation
Capacity (ltr)
Engine (D) (Without Diesel Particulate Filter)
Qualsyn MS FS 5W30 C3 (a, b, c, d, e, f)
6.5
Engine (D) (With Diesel Particulate Filter)
Qualsyn MS FS 5W30 C3 (g, h, i)
6.5
Transmission (Automatic)
Qualube FS ATF MF
Transmission (Semi-automatic)
 
1.5 (j)
Differential - rear
Qualube Syntogear TDL 80W90 (p, q)
0.95 / 1.1 / 1.2 / 1.6 (k, l, m, n, o)
Coolant
Product 1
Qualube Qualguard ORATEC Coolant (r, s)
7.0
Product 2
Qualube Qualguard HD5X Coolant
Brake system
Qualube Brake Fluid DOT4
1.4 - 2.25
Power Steering
Contact with our Technical Team
1.1
Gearbox hydraulic control
Contact with our Technical Team
0.5
Grease points (Other Grease location)
Product 1
Qualube Lithium EP 2
Product 2
Qualube Lithium Complex 2
Grease points (Front wheel bearings)
Qualube Lithium Complex 2
Air conditioning
 
Compressor
Contact with our Technical Team (t, u)
Shock Absorber
Contact with our Technical Team
1.1

Lubricant / Capacity Notes

a. Using fuel with a low sulphur content & >-25°C
b. Alternative recommendations, All temperatures & using fuel with a low sulphur content: Contact with our Technical Team
c. Alternative recommendations, All temperatures: Contact with our Technical Team
d. Alternative recommendations, Using fuel with a low sulphur content, >-25°C: Qualsyn MS FS 5W30 C3 / Qualsyn MS FS 5W30 VAG; Qualsyn MS FS 5W30 C3; Contact with our Technical Team
e. Alternative recommendations, >-25°C: Contact with our Technical Team; Qualsyn PCMO FS 5W30; Motul 8100 X-Cess 5W-40; Qualsyn PCMO FS 5W40
f. Alternative recommendations, >-20°C: Qualsyn PCMO FS 5W40
g. Using fuel with a low sulphur content & >-25°C
h. Alternative recommendations, All temperatures & using fuel with a low sulphur content: Contact with our Technical Team
i. Alternative recommendations, Using fuel with a low sulphur content, >-25°C: Qualsyn MS FS 5W30 C3 / Qualsyn MS FS 5W30 VAG; Qualsyn MS FS 5W30 C3; Contact with our Technical Team
j. Filled for life, 1.5 litres
k. Assembly diameter 198 mm, 1.1 litres
l. Assembly diameter 210 mm, 1.6 litres
m. Assembly diameter 200 mm, 1.1 litres
n. Assembly diameter 215 mm, 1.2 litres
o. Assembly diameter 187 mm, 0.95 litres
p. Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team
q. Alternative recommendations: Contact with our Technical Team; Qualube HD EP 90 / Qualube Syntogear TDL 80W90
r. De-ionised water with 50% anti-freeze & >-37°C
s. Alternative recommendations, >-37°C: Qualube Qualguard ORATEC Coolant
t. Bock/Bitzer
u. Alternative recommendations, Except Bock/Bitzer: Contact with our Technical Team

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model