Close Print
Application
Recommendation
Capacity (ltr)
Engine (D)
Qualsyn MS FS 5W30 ATD (a)
3.2
Transmission (Manual)
Product 1
Qualube SS 75W90 (b)
1.84
Product 2
Qualube Syntogear FS TDL 75W90
Transmission (Semi-automatic)
Product 1
Qualube SS 75W90 (c)
1.84
Product 2
Qualube Syntogear FS TDL 75W90
Coolant (55)
Qualube Qualguard ORATEC Coolant (d, e)
7.6
Coolant (70)
Qualube Qualguard ORATEC Coolant (f, g)
6.5
Brake system
Product 1
Qualube Brake Fluid DOT4 (h)
0.5
Product 2
Qualube Brake Fluid DOT5.1
Power Steering
Product 1
Qualube ATF Type D3 (i, j, k)
0.38
Product 2
Qualube FS ATF MF
Grease points (Constant velocity joint (wheel side))
Product 1
Qualube Lithium Complex Moly EP2M (l)
Product 2
Qualube Pin & Bush Grease
Product 3
Qualube LM2 Grease
Grease points (Constant velocity joint (differential side))
Contact with our Technical Team (m)
Air conditioning (With R1234yf refrigerant)
 
Air conditioning (With R134a refrigerant)
 
Compressor
Contact with our Technical Team
DEF tank
Contact with our Technical Team

Lubricant / Capacity Notes

a. All temperatures
b. Alternative recommendations: Contact with our Technical Team
c. Alternative recommendations: Contact with our Technical Team
d. Temperate regions & de-ionised water with 50% anti-freeze
e. Alternative recommendations, Cold regions & de-ionised water with 60% anti-freeze: Qualube Qualguard ORATEC Coolant
f. Temperate regions & de-ionised water with 50% anti-freeze
g. Alternative recommendations, Cold regions & de-ionised water with 60% anti-freeze: Qualube Qualguard ORATEC Coolant
h. Alternative recommendations: Contact with our Technical Team
i. Preferred lubricant specification
j. Alternative recommendations, Cold climates: Contact with our Technical Team
k. Alternative recommendations: Qualube ATF Type D3 / Qualube FS ATF MF
l. Alternative recommendations: Contact with our Technical Team
m. Alternative recommendations: Contact with our Technical Team

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model