Application |
Recommendation |
Capacity (ltr) |
|
---|---|---|---|
Engine (DT) (SAA6D114E-3, EGR)
|
Product 1
|
Qualube Extremol FS 10W30 (a, b, c, d, e) |
32.0
|
Product 2 |
Qualube Endurasyn SS 10W-30 | ||
Rear Axle
|
Contact with our Technical Team (f, g) |
40.0
|
|
Transmission (Case)
|
Qualube Hi-Q-4 10 (h, i) |
54.0
|
|
Front Axle
|
Contact with our Technical Team (f, j) |
49.0
|
|
Coolant
|
Qualube Qualguard ORATEC Coolant |
34.0
|
|
Hydraulics
|
Qualube Hi-Q-4 10 (k, l, m, n) |
139
|
|
All Grease Points
|
Product 1
|
Qualube Lithium EP 2 |
|
Product 2 |
Qualube Lithium Complex 2 |
a. | -20°C to 40°C |
b. | Alternative recommendations, HTHS > 3.5 mPa-S, -30°C to 30°C: Contact with our Technical Team |
c. | Alternative recommendations, HTHS > 3.5 mPa-S, -25°C to 40°C: Contact with our Technical Team |
d. | Alternative recommendations: Contact with our Technical Team |
e. | Alternative recommendations, -15°C to 50°C: Qualube Endurasyn SS 10W-40 / Qualube Masterfleet HD FS 10W40 |
f. | Where ambients are higher than 45°C, & machines operate longer than 12 hours/day, the use of CD 50 or TF CAT TO4 50 is preferred. Squeaking of brakes may occur but will not affect performance or durability |
g. | -30°C to 45°C |
h. | -30°C to 50°C |
i. | Alternative recommendations, -30°C to 50°C: Contact with our Technical Team |
j. | -30°C to 45°C |
k. | -20°C to 40°C |
l. | Alternative recommendations, -20°C to 50°C: Qualube Hydrapower HV46 / Qualube Enviroyl Hydrasyn XT46; Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 |
m. | Alternative recommendations, -20°C to 40°C: Contact with our Technical Team |
n. | Alternative recommendations, -15°C to 50°C: Qualube Endurasyn SS 10W-40 / Qualube Masterfleet HD FS 10W40 |
There are no notes to display for this model
Hours Max | 500 |
Hours Max | 2000 |
Hours Max | 1000 |
Hours Max | 2000 |
Hours Max | 2000 |
Hours Max | 2000 |
Copyright © OATS Ltd. 2024