Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT) (Cummins KT19-C)
Product 1
Qualube Endurol 15W40
38.0
Product 2
Qualube Eurofleet 15W40
Product 3
Qualube Endurasyn SS 10W-40
Transmission
  (a)
80.0
Coolant
Product 1
Qualube Qualguard Si-OAT Coolant
91.0
Product 2
Qualube Qualguard ORATEC Coolant
Brake System
Contact with our Technical Team
2.2
Hydraulics
Product 1
Qualube Hydraulic HM46 (b, c, d)
450
Product 2
Qualube Hydrapower HV46
Product 3
Qualube Enviroyl Hydrasyn XT46
Grease Points
Product 1
Qualube Lithium Complex Moly EP2M (e, f)
Product 2
Qualube Pin & Bush Grease
Product 3
Qualube LM2 Grease
Front Axle incl Reduction Hubs (each)
Contact with our Technical Team
180
Rear Differential & Reduction Hubs
Contact with our Technical Team
180

Lubricant / Capacity Notes

a. Primary recommendation: Transmission (inc torque converter): Contact with our Technical Team. Qualube Eurofleet 10 or Qualube ATF Type D / Qualube FS ATF MF is also acceptable
b. Alternative recommendations, -18°C to 30°C: Qualube Hydraulic HM46 / Qualube Hydrapower HV46 / Qualube Enviroyl Hydrasyn XT46
c. Alternative recommendations, <0°C: Qualube Hydraulic HM32 / Qualube Hydrapower HV32
d. Alternative recommendations, >30°C: Qualube Hydraulic HM100 / Qualube Hydrapower HV100
e. Alternative recommendations, <-10°C: Contact with our Technical Team
f. Alternative recommendations, >-10°C: Qualube Lithium Complex Moly EP2M / Qualube Pin & Bush Grease / Qualube LM2 Grease

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (DT) (Cummins KT19-C)
Hours Max 250
Coolant
Months Max 24
Hours Max 3000
Hydraulics
Hours Max 2000