Close Print
Application
Recommendation
Capacity (ltr)
Engine (EN590/D975 15-1000ppm) (Cummins QSB4.5, 115kW)
Contact with our Technical Team (a)
19.0
Transmission (Powershift)
Qualube Extendol 10W40
Coolant
Qualube Qualguard Si-OAT Coolant (b)
32.0
Hydraulics (Reservoir/System)
Qualube Hydrapower HV46 (c, d, e, f)
155 / 350
Final Drive Hubs (each)
Qualube LS HD EP 80W90 (g, h)
2.5
Grease Points
Qualube Lithium Complex 2 (i)
Axles (Kessler LT-D Fixed/Steered Axle)
Qualube LS HD EP 80W90 (j, k)
14.5 / 11.0
Centralised Lubrication System (Grease)
Qualube Lithium Complex 2 (l, m)
Pump Distributor Gearbox
Qualube Extendol 10W40

Lubricant / Capacity Notes

a. Alternative recommendations: Contact with our Technical Team
b. Mix ratio, 50% >-37°C
c. -20°C to 40°C
d. Alternative recommendations, -25°C to 45°C: Contact with our Technical Team
e. Alternative recommendations, 10°C to 45°C: Contact with our Technical Team
f. Alternative recommendations, 15°C to 55°C: Contact with our Technical Team
g. -30°C to 50°C
h. Alternative recommendations, -30°C to 50°C: Qualube LS HD EP 80W90
i. -25°C to 150°C
j. -30°C to 50°C
k. Alternative recommendations, -30°C to 50°C: Qualube LS HD EP 80W90
l. -25°C to 150°C
m. Alternative recommendations, -25°C to 150°C: Qualube Lithium EP 2 / Qualube Lithium Complex 2

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (EN590/D975 15-1000ppm) (Cummins QSB4.5, 115kW)
Hours Max 250
Transmission (Powershift)
Hours Max 1000
Coolant
Months Max 48
Hours Max 6000
Hydraulics (Reservoir/System)
Hours Max 3000
Final Drive Hubs (each)
Hours Max 2000
Axles (Kessler LT-D Fixed/Steered Axle)
Hours Max 2000
Pump Distributor Gearbox
Hours Max 500

Copyright © OATS Ltd. 2024