Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT) (Liebherr D 934L Tier3/Stage3A; 129kW)
Product 1
Qualube Extremol 10W40 (a, b)
29.0
Product 2
Qualube Supremol 10W40
Product 3
Qualube Endurasyn SS 10W-40
Transmission (2-speed powershift)
Product 1
Qualube Extremol 10W40
3.0
Product 2
Qualube Endurasyn SS 10W-40
Product 3
Qualube Extendol 10W40
Coolant
Product 1
Qualube Qualguard Si-OAT Coolant (c)
Product 2
Qualube Qualguard ORATEC Coolant
Hydraulics
Product 1
Qualube Hydrapower HV46 (d, e, f)
430
Product 2
Qualube Enviroyl Hydrasyn XT46
Grease Points
Qualube Lithium Complex 2 (g)
Pump Drive Gearbox
Qualube LS HD EP 80W90
1.9
Reduction Hubs (x 4)
Qualube LS HD EP 80W90 (h)
2.5 - 3.0
Rigid Axle (type 1049/1050 & 1051)
Qualube LS HD EP 80W90 (i)
14.5 / 19.0
Steering Axle (type 1049/1050 & 1051)
Qualube LS HD EP 80W90 (j)
11.0 / 26.5
Swing Gearbox
Qualube LS HD EP 80W90 (k)
6.0

Lubricant / Capacity Notes

a. -20°C to 45°C
b. Alternative recommendations, -30°C to 30°C: Qualube FS Extendol 5W30 / Qualube Supremol 5W30; Qualube FS Extendol 5W30
c. Mix ratio, 50% >-37°C
d. 0°C to 40°C
e. Alternative recommendations, 5°C to 40°C: Qualube FS Extendol 5W30
f. Alternative recommendations, 10°C to 45°C: Qualube Hydraulic HM68 / Qualube Hydrapower HV68
g. Alternative recommendations: Qualube Lithium Complex 1
h. -30°C to 50°C
i. -30°C to 50°C
j. -30°C to 50°C
k. -30°C to 50°C

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (DT) (Liebherr D 934L Tier3/Stage3A; 129kW)
Hours Max 500
Transmission (2-speed powershift)
Hours Max 1000
Coolant
Months Max 24
Hours Max 2000
Hydraulics
Hours Max 2000
Pump Drive Gearbox
Hours Max 500
Reduction Hubs (x 4)
Hours Max 1000
Rigid Axle (type 1049/1050 & 1051)
Hours Max 1000
Steering Axle (type 1049/1050 & 1051)
Hours Max 1000
Swing Gearbox
Hours Max 1000