Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT)
Product 1
Qualube Endurol 15W40 (a, b)
27.5
Product 2
Qualube Extremol 15W40
Product 3
Qualube Extremol 10W40
Transmission
Qualube Hi-Q-4 30
92.0
Final Drives (each)
Qualube Hi-Q-4 50 (c, d, e, f, g, h, i, j)
19.0 / 20.0
Coolant
Qualube Qualguard ORATEC Coolant (k)
39.0
Hydraulics
Qualube Eurofleet 10 (l)
42.0
Greases: Molybdenum
Qualube Lithium Complex Moly EP2M
Greases: Multipurpose
Qualube Lithium Complex 2
Greases: Special Purpose (high temp. antifriction bearings)
Contact with our Technical Team
Midroller hubs
Qualube Hi-Q-4 30
Pivot joint (where fitted)
Product 1
Qualube HD EP 80W90
Product 2
Qualube Syntogear TDL 80W90
Product 3
Qualube LS HD EP 80W90
Steering control mechanism (where fitted)
Qualube Eurofleet 10
Winch (where fitted)
Qualube Hi-Q-4 30

Lubricant / Capacity Notes

a. Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b. Alternative recommendations, -20°C to 40°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Supremol 5W30
c. Factory fill viscosity: 50
d. Alternative recommendations, -40°C to 10°C: Contact with our Technical Team
e. Alternative recommendations, -40°C to 0°C: Contact with our Technical Team
f. Alternative recommendations, -30°C to 10°C: Contact with our Technical Team
g. Alternative recommendations, -30°C to 0°C: Qualube Hi-Q-4 10
h. Alternative recommendations, -25°C to 25°C: Qualube Hi-Q-4 30
i. Alternative recommendations, -15°C to 50°C: Qualube Hi-Q-4 50
j. Alternative recommendations, -10°C to 50°C: Contact with our Technical Team
k. Mix ratio, 50%
l. Alternative recommendations, Hydraulics/hydrostatic system: Qualube Endurasyn SS 10W-30 / Qualube Agri - Supreme 10W30 / Qualube Agri - Supreme 10W40; Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Endurasyn SS 10W-40

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (DT)
Hours Max 250
Transmission
Hours Max 1000
Final Drives (each)
Hours Max 1000
Coolant
Hours Max 3000
Hydraulics
Hours Max 1000