Close Print
Application
Recommendation
Capacity (ltr)
Engine (D / DT) (Caterpillar 3054/3054T)
Product 1
Qualube Endurol 15W40 (a, b, c, d, e, f, g)
7.8
Product 2
Qualube Extremol 15W40
Product 3
Qualube Extremol 10W40
Rear Axle
Product 1
Qualube Agri - Supreme 10W30
7.0
Product 2
Qualube WBTO 10W30
Product 3
Qualube TTX Trans
Transfer Drive
Qualube Hi-Q-4 30
1.5
Transmission
Qualube Hi-Q-4 30 (h, i)
12.0
Front Axle
Product 1
Qualube Agri - Supreme 10W30
7.0
Product 2
Qualube WBTO 10W30
Product 3
Qualube TTX Trans
Coolant
Qualube Qualguard ORATEC Coolant
24.0
Brake System
Qualube Eurofleet 10
Hydraulics
Product 1
Qualube Endurol 15W40
190
Product 2
Qualube Eurofleet 10
Product 3
Qualube Hi-Q-4 10
Reduction Hubs (each)
Product 1
Qualube Agri - Supreme 10W30
2.0
Product 2
Qualube WBTO 10W30
Product 3
Qualube TTX Trans

Lubricant / Capacity Notes

a. Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b. Alternative recommendations, -40°C to 30°C: Contact with our Technical Team
c. Alternative recommendations, -40°C to 10°C: Contact with our Technical Team
d. Alternative recommendations, -30°C to 40°C: Contact with our Technical Team
e. Alternative recommendations, -30°C to 30°C: Qualube Supremol 5W30
f. Alternative recommendations, -20°C to 40°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Supremol 5W30
g. Alternative recommendations, -15°C to 50°C: Qualube Endurol 15W40 / Qualube Extremol 15W40 / Qualube Extremol 10W40
h. 0°C to 35°C
i. Alternative recommendations, -20°C to 10°C: Qualube Hi-Q-4 10

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (D / DT) (Caterpillar 3054/3054T)
Hours Max 500
Rear Axle
Hours Max 1000
Transfer Drive
Months Max 12
Hours Max 1000
Transmission
Months Max 12
Hours Max 1000
Front Axle
Hours Max 1000
Coolant
Months Max 24
Hours Max 2000
Hydraulics
Months Max 24
Hours Max 2000
Reduction Hubs (each)
Months Max 12
Hours Max 1000