Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Crankcase
|
Contact with our Technical Team (a, b) |
|
|
|
Cylinders
|
(c) |
|
|
| a. | Avoid heavy detergent oils or compounded oils |
| b. | Minimum specification: Viscosity 54 to 70 SSU at 100°C, flash point 190°C, pour point -12°C max, carbon residue (Conradson) 0.45% max, sulphated ash 0.01% max, neutralisation no. 0.10 max. Detergent oil: Viscosity at 100°C 52 to 70 SSU, Carbon residue (Conradson) 0.45% on base stock, sulphated ash 0.40% on base oil. Pour point must be at least -12°C below the ambient temperature of start up. SAE 30 ashless or low ash detergent/dispersant four cycle gas engine oil preferred. Must be on list of approved oils |
| c. | Lubricants must be selected on the basis of the process gas and must be compatible and of the appropriate viscosity. Synthetics are specified for certain gases. Refer to manufacturers 'Special Instructions for Compressor Cylinder Lubrication and Break-in', Form PG-631-C |
There are no notes to display for this model
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024