Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Operating elements & bearings (-10°C ... 5°C)
|
Product 1
|
Qualube Hydraulic HM46 (a, b) |
0.7 - 70.0
|
Product 2 |
Qualube Hydraulic HM68 | ||
Product 3 |
Qualube Hydrapower HV46 | ||
|
Operating elements & bearings (0°C ... 35°C)
|
Product 1
|
Qualube Hydraulic HM100 (a, b) |
0.7 - 70.0
|
Product 2 |
Qualube MEP 100 | ||
Product 3 |
Qualube MEP 150 | ||
|
Operating elements & bearings (30°C ... 50°C)
|
Product 1
|
Qualube MEP 220 (a, b) |
0.7 - 70.0
|
Product 2 |
Qualube MEP 320 | ||
| a. | Depending on the size and mounting position (horizontal or vertical) forced lubrication systems may be used. Grease lubrication is used on some smaller units as follows: ambient minus 10°C to 50°C; maintenance free units are filled with Shell Alvania RA at factory; other units Shell Alvania 2 or Cosmo Dynamax 2 recommended |
| b. | Viscosity specification: minimum at operating oil temperature 15 cSt.; maximum at start up, oil bath lubrication 4300 cSt., forced oil circulation 2200 cSt. (for pump start). High viscosity index oils are recommended |
There are no notes to display for this model
| Hours Max | 25000 |
| Hours Max | 2500 |
| Hours Max | 2500 |
Copyright © OATS Ltd. 2024