Qualube MEP 68
is recommended for your SUMITOMO (CYCLO DRIVE)
Recommendations for your SUMITOMO (CYCLO DRIVE)
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Bearings & gears - above 100 rpm (-10°C ... 15°C)
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Bearings & gears - above 100 rpm (0°C ... 15°C)
Recommendation
Product 1
Qualube FS PAO MEP 150
Product 2
Qualube MEP 150
Product 3
Qualube Slideway 150
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Bearings & gears - above 100 rpm (10°C ... 50°C)
Recommendation
Product 1
Qualube FS PAO MEP 220
Product 2
Qualube MEP 220
Product 3
Qualube Slideway 220
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Bearings & gears - below 100 rpm (-10°C ... 15°C)
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Bearings & gears - below 100 rpm (0°C ... 15°C)
Recommendation
Product 1
Qualube FS PAO MEP 220
Product 2
Qualube MEP 220
Product 3
Qualube Slideway 220
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Bearings & gears - below 100 rpm (10°C ... 50°C)
Capacity
3.0 - 600 (ltr)
Notes
- a. Forced lubrication may be used when high speed shaft speed is outside the range 750 to 1800 rpm. Some units may have grease lubricated bearings; use GrLi2/3, GrLiE2/3 or better
Oil Change Intervals
Bearings & gears - above 100 rpm (-10°C ... 15°C)
Hours Max | 2500 |
Bearings & gears - above 100 rpm (0°C ... 15°C)
Hours Max | 2500 |
Bearings & gears - above 100 rpm (10°C ... 50°C)
Hours Max | 2500 |
Bearings & gears - below 100 rpm (-10°C ... 15°C)
Hours Max | 2500 |
Bearings & gears - below 100 rpm (0°C ... 15°C)
Hours Max | 2500 |
Bearings & gears - below 100 rpm (10°C ... 50°C)
Hours Max | 2500 |