Qualube Lithium EP 2
is recommended for your BROOK HANSEN
Recommendations for your BROOK HANSEN
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Bearings (grease)
Recommendation
Product 1
Qualube Lithium EP 2
Product 2
Qualube Lithium Complex 2
Product 3
Qualube Lithium EP 3
Notes
- a. Qualube Lithium EP 2 / Qualube Lithium Complex 2 may be used for labyrinth type seals and grease lubricated lower bearings of the low speed shaft
Bearings (oil)
Notes
- b. Select lubricant according to information on nameplate. Viscosity is selected on basis of operating conditions specified in original order. Manufacturer lists suitable products against AGMA EP grades but equivalent brands may be used
- c. Synthetic oils may be used with written permission from manufacturer but only those based on PAO are currently acceptable and can be used with extended oil drain if sampled every 4000 hours
- d. Alternative recommendations: Qualube FS PAO MEP 220 / Qualube MEP 220 / Qualube Slideway 220; Qualube FS PAO MEP 150 / Qualube MEP 150 / Qualube Slideway 150; Qualube FS PAO MEP 460 / Qualube MEP 460
Motor Bearings
Recommendation
Product 1
Contact with our Technical Team
Oil Change Intervals
Bearings (oil)
| Months Max | 18 |
| Hours Min | 4000 |
| Hours Max | 8000 |