Close Print
Application
Recommendation
Capacity (ltr)
Bearings & Gears (-20°C ... 5°C)
Product 1
Qualube MEP 100 (a)
Product 2
Qualube Slideway 100
Bearings & Gears (5°C ... 30°C)
Product 1
Qualube FS PAO MEP 150 (a)
Product 2
Qualube MEP 150
Product 3
Qualube Slideway 150
Bearings & Gears (30°C ... 50°C)
Product 1
Qualube FS PAO MEP 320 (a)
Product 2
Qualube MEP 320
Bearings & Gears (-30°C ... 65°C)
Qualube FS PAO MEP 150 (a, b)
Multi-disk Brake
Product 1
Qualube Hydraulic HM32
Product 2
Qualube Hydrapower HV32

Lubricant / Capacity Notes

a. Manufacturer's specification; Minimum VI 95 for mineral oils, 165 for synthetic oils. Recommended viscosity 40 cSt to 60 cSt at working temperature. Working temperatures should not exceed 90°C. Capacities vary according to mounting position. Check application for seal compatibility when using synthetics
b. Alternative recommendations: Contact with our Technical Team; Qualube FS PAO MEP 220

General Notes

There are no notes to display for this model

Oil Change Intervals

Bearings & Gears (-20°C ... 5°C)
Months Max 12
Hours Max 2500
Bearings & Gears (5°C ... 30°C)
Months Max 12
Hours Max 2500
Bearings & Gears (30°C ... 50°C)
Months Max 12
Hours Max 2500
Bearings & Gears (-30°C ... 65°C)
Months Max 12
Hours Max 2500