Close Print
Application
Recommendation
Capacity (ltr)
Bearings & Gears (-9°C ... 15°C)
Product 1
 Qualube Compressor 68 (a, b)
1.5
Product 2
 Qualube MEP 68
Bearings & Gears (10°C ... 52°C)
Product 1
 Qualube Hydraulic HM100 (a, b)
1.5
Product 2
 Qualube MEP 100
Product 3
 Qualube MEP 150

Lubricant / Capacity Notes

a. Synthetic oils are recommended for units operating with oil temperatures above 82°C or when start up temperatures are below -6°C. Synthetic hydrocarbon based products are listed by manufacturer. Change intervals as for mineral oils
b. Oil change periods should be reduced to 500-700 hours when using mineral oils at operating temperatures above 82°C

General Notes

There are no notes to display for this model

Oil Change Intervals

Bearings & Gears (-9°C ... 15°C)
Months Max 3
Hours Min 1000
Hours Max 1500
Bearings & Gears (10°C ... 52°C)
Months Max 3
Hours Min 1000
Hours Max 1500

Copyright © OATS Ltd. 2024