Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT)
Qualube Masterfleet HD FS 10W40 (a, b, c)
30.0
Final Drive (each)
Product 1
Qualube LS HD EP 80W90 (d, e, f)
5.6
Product 2
Qualube Syntogear FS TDL 75W90
Coolant
Qualube Qualguard ORATEC Coolant (g)
45.4
Hydraulics (Percussion Drills)
Qualube Hydrapower HV46 (h, i, j)
432
Grease Points
Qualube Lithium Complex Moly EP2M (k)
Air Compressor (Sump)
Contact with our Technical Team
30.2
Bearings (Undercarriage)
Qualube Lithium Complex Moly EP2M (l)
Centralised Lubrication System
Qualube Lithium Complex Moly EP2M (m)
Feeder Gearbox (Drill Feed Drive)
Product 1
Qualube LS HD EP 80W90 (n, o, p)
3.5
Product 2
Qualube Syntogear FS TDL 75W90
Idlers (Undercarriage)
Qualube Lithium Complex Moly EP2M (q)
Rock Drill (Grease Lubricator)
Contact with our Technical Team

Lubricant / Capacity Notes

a. -10°C to 50°C
b. Alternative recommendations, -18°C to 40°C: Contact with our Technical Team
c. Alternative recommendations, -10°C to 50°C: Qualube Masterfleet HD FS 10W40
d. -20°C to 40°C
e. Alternative recommendations, -30°C to 45°C: Qualube Syntogear SA 75W-140
f. Alternative recommendations, -10°C to 50°C: Qualube Syntogear SA 75W-140 / Qualube HD EP 85W140 / Qualube LSHDEP 85W140
g. Mix ratio, 50% >-37°C
h. -29°C to 50°C
i. Alternative recommendations, 10°C to 50°C: Qualube Hydrapower HV100
j. Alternative recommendations, >32°C: Qualube Hydrapower HV150
k. Alternative recommendations: Contact with our Technical Team
l. Alternative recommendations: Contact with our Technical Team
m. Alternative recommendations: Contact with our Technical Team
n. -20°C to 40°C
o. Alternative recommendations, -30°C to 45°C: Qualube Syntogear SA 75W-140
p. Alternative recommendations, -10°C to 50°C: Qualube Syntogear SA 75W-140 / Qualube HD EP 85W140 / Qualube LSHDEP 85W140
q. Alternative recommendations: Contact with our Technical Team

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (DT)
Months Max 3
Hours Max 500
Final Drive (each)
Months Max 12
Hours Max 2000
Coolant
Hours Min 6000
Hours Max 12000
Hydraulics (Percussion Drills)
Months Max 12
Hours Max 2500
Air Compressor (Sump)
Months Max 12
Hours Max 1000
Feeder Gearbox (Drill Feed Drive)
Months Max 12
Hours Max 2000