Close Print
Application
Recommendation
Capacity (ltr)
Engine (D / DT)
Product 1
Qualube Endurol 15W40 (a, b, c, d, e, f, g, h)
Product 2
Qualube Eurofleet 15W40
Product 3
Qualube Extremol 10W40
Coolant
Product 1
Qualube Qualguard Si-OAT Coolant (i)
Product 2
Qualube Universal Antifreeze
Product 3
Qualube Qualguard ORATEC Coolant

Lubricant / Capacity Notes

a. Oil change interval can be extended using John Deere PLUS-50 or E4/E5 with specified John Deere filters, up to a maximum of 500 hours. Without specified filters change engine oil and filters at the normal service interval
b. During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use
c. Multigrade engine oils are preferred. Synthetic engine oils are also suitable
d. Alternative recommendations, -40°C to 50°C: Contact with our Technical Team
e. Alternative recommendations, -30°C to 40°C: Contact with our Technical Team
f. Alternative recommendations, -25°C to 50°C: Qualube Extremol 10W40 / Qualube Endurasyn SS 10W-40 / Qualube Extendol 10W40
g. Alternative recommendations, -25°C to 40°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30
h. Alternative recommendations, -20°C to 50°C: Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Extremol 10W40
i. Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D5345 (pre-diluted) or Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D4985 (concentrate) plus supplemental coolant additives

General Notes

1. Fuel sulphur content greater than 0.5% results in oil change intervals reduced by half

Oil Change Intervals

There is no Oil Change Interval data to display for this model