Witham Oil & Paint

Application	Recommendation
Engine (D / DT)	Product 1	Qualube Endurol 15W40 (a, b)
	Product 2	Qualube Eurofleet 15W40
	Product 3	Qualube Endurasyn SS 10W-40
Coolant	Product 1	Qualube Qualguard Si-OAT Coolant (c)
	Product 2	Qualube Universal Antifreeze
	Product 3	Qualube Qualguard ORATEC Coolant

a.	During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use
b.	Multigrade engine oils are preferred. Synthetic engine oils are also suitable
c.	Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D5345 (pre-diluted) or Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D4985 (concentrate) plus supplemental coolant additives

1.	Fuel sulphur content greater than 0.5% results in oil change intervals reduced by half

There is no Oil Change Interval data to display for this model