Witham Oil & Paint

Application	Recommendation		Capacity (ltr)
Engine (D / DT)	Product 1	Qualube Endurol 15W40 (a, b, c)	5.2
	Product 2	Qualube Eurofleet 15W40
	Product 3	Qualube Extremol 10W40
Coolant	Product 1	Qualube Qualguard Si-OAT Coolant (d)
	Product 2	Qualube Universal Antifreeze
	Product 3	Qualube Qualguard ORATEC Coolant

a.	Oil change interval can be extended using John Deere PLUS-50 or E4/E5 with specified John Deere filters, up to a maximum of 500 hours. Without specified filters change engine oil and filters at the normal service interval
b.	During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use
c.	Multigrade engine oils are preferred. Synthetic engine oils are also suitable
d.	Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D5345 (pre-diluted) or Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC CoolantTM D4985 (concentrate) plus supplemental coolant additives

1.	Fuel sulphur content greater than 0.5% results in oil change intervals reduced by half

There is no Oil Change Interval data to display for this model