Close Print
Application
Recommendation
Capacity (ltr)
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, 6.0-6.9 mpg)
Product 1
 Qualube Extremol 15W40 (a)
53.0
Product 2
 Qualube Extremol 10W40
Product 3
 Qualube Extremol FS 10W30
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp - with OilGuard, >7.0 mpg [DT])
Product 1
 Qualube Extremol 15W40 (b)
53.0
Product 2
 Qualube Extremol 10W40
Product 3
 Qualube Extremol FS 10W30
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, <5.9 mpg [DT])
Product 1
 Qualube Extremol 15W40 (c)
53.0
Product 2
 Qualube Extremol 10W40
Product 3
 Qualube Extremol FS 10W30
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, >7.0 mpg [DT])
Product 1
 Qualube Extremol 15W40 (d)
53.0
Product 2
 Qualube Extremol 10W40
Product 3
 Qualube Extremol FS 10W30
Coolant
Product 1
 Qualube Qualguard Si-OAT Coolant (e)
Product 2
 Qualube Qualguard ORATEC Coolant

Lubricant / Capacity Notes

a. Alternative recommendations: Contact with our Technical Team; Qualube Extremol FS 10W30; Qualube Extremol 15W40 / Qualube Extremol 10W40
b. Alternative recommendations: Contact with our Technical Team; Qualube Extremol FS 10W30; Qualube Extremol 15W40 / Qualube Extremol 10W40
c. Alternative recommendations: Contact with our Technical Team; Qualube Extremol FS 10W30; Qualube Extremol 15W40 / Qualube Extremol 10W40
d. Alternative recommendations: Contact with our Technical Team; Qualube Extremol FS 10W30; Qualube Extremol 15W40 / Qualube Extremol 10W40
e. Mix ratio, 50% >-37°C

General Notes

1. Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in
2. Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used

Oil Change Intervals

Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, 6.0-6.9 mpg)
Miles Max 50000
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp - with OilGuard, >7.0 mpg [DT])
Miles Max 100000
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, <5.9 mpg [DT])
Miles Max 40000
Engine (DT) (Cummins X15, DPF+SCR; 400-500hp, >7.0 mpg [DT])
Miles Max 75000

Copyright © OATS Ltd. 2024