Application |
Recommendation |
Capacity (ltr) |
|
---|---|---|---|
Hydraulics
|
Product 1
|
Qualube ATF Type D3 (a) |
11.4
|
Product 2 |
Qualube FS ATF MF |
a. | Powered by PTO |
1. | Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in |
2. | Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used |
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024