Application |
Recommendation |
Capacity (ltr) |
|
---|---|---|---|
Engine (DT)
|
Product 1
|
Qualube Endurol 15W40 (a, b, c) |
|
Product 2 |
Qualube Eurofleet 15W40 | ||
Product 3 |
Qualube Endurasyn SS 10W-40 |
a. | Minimum acceptable 'Standard' quality with reduced drain intervals shown. CG-4 may also be used with reduced drain intervals. CH-4, EO CUM 20071 or 20076 required for 'Premium' classification with extended drain intervals. |
b. | Centinel equipped Signature 600/ISX, ISM engines require use of Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Endurasyn SS 10W-40 |
c. | Engine oil viscosity recommendations: -30°C to 0°C, 0W-30; -25°C to 20°C, 5W-30; -20°C to 20°C, 10W-30; -12°C to above 40°C, 15W-40. Monogrades: -20°C to -6°C, 10W; -10°C to 20°C, 20W; 4°C to 32°C, 30; above 10°C, 40. The use of monograde engine oils reduces oil change interval |
1. | Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in |
2. | Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used |
Miles Min | 6250 |
Miles Max | 37500 |
Months Min | 6 |
Months Max | 6 |
Hours Min | 125 |
Hours Max | 700 |
Copyright © OATS Ltd. 2024