Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (CNG)
|
Contact with our Technical Team (a) |
|
|
| a. | Limits for gas engine oil: Ash max. 0.5%, TBN 5-7 (D2896), TAN 0.5-0.7 with limits on phosphorous and zinc (250-350 ppm) and calcium 1200 ppm |
| 1. | Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in |
| 2. | Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used |
There is no Oil Change Interval data to display for this model
Copyright © OATS Ltd. 2024