Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (P / LPG) (Ford, WSG-1068)
|
Product 1
|
Qualube Endurasyn SS 10W-30 (a, b, c) |
6.2 / 10.4
|
Product 2 |
Qualsyn MS FS 5W30 C3 | ||
|
Coolant
|
Product 1
|
Qualube Qualguard Si-OAT Coolant (d) |
32.2
|
Product 2 |
Qualube Qualguard ORATEC Coolant | ||
| a. | Standby use change 6.2 liters 12 monthhs, Primary use change 10.4 liters 500 hours & >-18°C |
| b. | Alternative recommendations, <-38°C: Qualsyn MS FS 5W30 C3 |
| c. | Alternative recommendations, >0°C: Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Extremol 10W40 |
| d. | Mix ratio, 50% |
| 1. | Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in |
| 2. | Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used |
| Months Max | 12 |
| Hours Max | 500 |
| Months Max | 24 |
| Hours Max | 1000 |
Copyright © OATS Ltd. 2024