Qualube Endurol 15W40
is recommended for your CUMMINS incl. ONAN GENERATORS
Recommendations for your CUMMINS incl. ONAN GENERATORS
All our lubricants are designed to meet all the required standards and requirements of the Original Equipment Manufacturers, as well as ensuring the latest ACEA and API quality recommendations. If you need any help choosing or locating the right oil for your engine or equipment please contact us and we will be happy to help.
Engine (P)
Recommendation
Product 1
Qualube Endurol 15W40
Product 2
Qualube Extremol 15W40
Product 3
Qualube Extremol 10W40
Capacity
1.1 (ltr)
Notes
- a. -12°C to 38°C
- b. Alternative recommendations, -18°C to 27°C: Qualube Endurasyn SS 10W-30 / Qualsyn MS FS 5W30 C3 / Qualube Supremol 5W30; Qualube Extremol 10W40 / Qualube Endurasyn SS 10W-40 / Qualsyn PCMO SS 10W40
- Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in
- Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used
Coolant
Recommendation
Product 1
Qualube Qualguard Si-OAT Coolant
Product 2
Qualube Qualguard ORATEC Coolant
Notes
- Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in
- Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used
Oil Change Intervals
There is no Oil Change Interval data to display for this model