Close Print
Application
Recommendation
Capacity (ltr)
Engine (P)
Qualsyn PCMO FS 5W30 (a, b, c, d)
9.0
Transfer box
Qualube FS ATF MF
Transmission (Automatic)
Qualube FS ATF MF
9.0
Differential - front
Contact with our Technical Team (e, f)
1.1
Differential - rear (Locking differential)
Contact with our Technical Team
1.6
Differential - rear (Open differential)
Qualube Syntogear TDL 80W90 (g, h)
1.1
Coolant
Product 1
Qualube Qualguard ORATEC Coolant (i, j, k, l)
6.5
Product 2
Qualube Qualguard HD5X Coolant
Brake system
Product 1
Qualube Brake Fluid DOT4
0.8
Product 2
Qualube Brake Fluid DOT5.1
Power Steering
Qualube FS ATF MF (m)
1.2
Air conditioning
 
(n, o)
Compressor
Contact with our Technical Team

Lubricant / Capacity Notes

a. >-25°C
b. Alternative recommendations, All temperatures: Contact with our Technical Team
c. Alternative recommendations, >-25°C: Contact with our Technical Team; Motul 8100 X-Cess 5W-40; Qualsyn PCMO FS 5W40
d. Alternative recommendations, >-20°C: Qualsyn PCMO FS 5W40
e. Preferred lubricant specification
f. Alternative recommendations: Contact with our Technical Team
g. Alternative recommendations, Preferred lubricant specification: Contact with our Technical Team
h. Alternative recommendations: Contact with our Technical Team; Qualube HD EP 90 / Qualube Syntogear TDL 80W90
i. De-ionised water with 55% anti-freeze & >-45°C
j. Alternative recommendations, De-ionised water with 50% anti-freeze, >-37°C: Qualube Qualguard ORATEC Coolant / Qualube Qualguard HD5X Coolant; Qualube Qualguard Si-OAT Coolant
k. Alternative recommendations, De-ionised water with 55% anti-freeze, >-45°C: Qualube Qualguard Si-OAT Coolant
l. Alternative recommendations, Note: Do not dilute the coolant!, >-37°C: Qualube Qualguard ORATEC Coolant; Contact with our Technical Team
m. Alternative recommendations: Contact with our Technical Team
n. With rear air conditioning, 1,220 g
o. Without rear air conditioning, 970 g

General Notes

There are no notes to display for this model

Oil Change Intervals

There is no Oil Change Interval data to display for this model