Close Print
Application
Recommendation
Capacity (ltr)
Engine (EN590/D975 <15ppm) (CASE IH Cursor, 6-cyl, 15.9L, twin turbo; 527kW)
Product 1
 Qualube Extremol 15W40 (a, b, c, d, e)
32.0
Product 2
 Qualube Extremol 10W40
Transmission (PowerDrive)
Contact with our Technical Team
70.1
Coolant (Main Cooling/Secondary Cooling System)
Contact with our Technical Team (f)
70.0 / 40.8
Hydraulics (& Axles, without/with three-point hitch)
Contact with our Technical Team
314 / 333
Articulation (Hinges/Oscillation/Articulation/Hitch Cylinders & Links)
Product 1
 Qualube Lithium Complex Moly EP2M (g)
Product 2
 Qualube Pin & Bush Grease
Product 3
 Qualube LM2 Grease
Diesel Exhaust Fluid (DEF) Tank
Contact with our Technical Team
322
Drive shaft bearings
Qualube Lithium EP 2 (h)
Idler Hub (each)
Contact with our Technical Team
0.48
PTO (Bearing)
Qualube Lithium EP 2 (i)
PTO (Slip Joint)
Product 1
 Qualube Lithium Complex Moly EP2M (j)
Product 2
 Qualube Pin & Bush Grease
Product 3
 Qualube LM2 Grease
Roller Hub (each)
Contact with our Technical Team
0.25

Lubricant / Capacity Notes

a. -10°C to 50°C
b. Alternative recommendations, -30°C to 50°C: Contact with our Technical Team
c. Alternative recommendations, -20°C to 50°C: Contact with our Technical Team; Qualube Extremol 10W40 / Qualube Supremol 10W40 / Qualube Masterfleet HD FS 10W40
d. Alternative recommendations, -20°C to 40°C: Contact with our Technical Team; Qualube Extremol FS 10W30; Qualube Supremol 5W30
e. Alternative recommendations, -10°C to 50°C: Contact with our Technical Team
f. Mix ratio, 50% >-37°C
g. Alternative recommendations: Contact with our Technical Team
h. Alternative recommendations: Contact with our Technical Team; Qualube Lithium EP 2 / Qualube Lithium Complex 2
i. Alternative recommendations: Contact with our Technical Team; Qualube Lithium EP 2 / Qualube Lithium Complex 2
j. Alternative recommendations: Contact with our Technical Team

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (EN590/D975 <15ppm) (CASE IH Cursor, 6-cyl, 15.9L, twin turbo; 527kW)
Hours Max 300
Transmission (PowerDrive)
Hours Max 1200
Coolant (Main Cooling/Secondary Cooling System)
Hours Max 2400
Hydraulics (& Axles, without/with three-point hitch)
Hours Max 1800
Articulation (Hinges/Oscillation/Articulation/Hitch Cylinders & Links)
Hours Max 50
Drive shaft bearings
Hours Max 50
Idler Hub (each)
Hours Max 2400
PTO (Bearing)
Hours Max 600
PTO (Slip Joint)
Hours Max 600
Roller Hub (each)
Hours Max 2400

Copyright © OATS Ltd. 2024