Close Print
Application
Recommendation
Capacity (ltr)
Engine (D / DT)
Product 1
Qualube Endurol 15W40 (a, b)
26.0
Product 2
Qualube Extremol 15W40
Product 3
Qualube Extremol 10W40
Transmission
Qualube Hi-Q-4 30
57.0
Final Drives (each)
Qualube Hi-Q-4 30 (c)
209
Coolant
Qualube Qualguard ORATEC Coolant (d)
42.0 / 58.0
Hydraulics
Qualube Eurofleet 10 (e)
110
Front Idler Hubs
Qualube Hi-Q-4 30
Greases: Molybdenum
Qualube Lithium Complex Moly EP2M
Greases: Multipurpose
Qualube Lithium Complex 2
Greases: Special Purpose (high temp. antifriction bearings)
Contact with our Technical Team
Midroller hubs
Qualube Hi-Q-4 30
Pivot joint (where fitted)
Product 1
Qualube HD EP 80W90
Product 2
Qualube Syntogear TDL 80W90
Product 3
Qualube LS HD EP 80W90
Steering control mechanism (where fitted)
Qualube Eurofleet 10
Winch (where fitted)
Qualube Hi-Q-4 30

Lubricant / Capacity Notes

a. Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b. Alternative recommendations, -20°C to 40°C: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Supremol 5W30
c. Factory fill viscosity: 30
d. Mix ratio, 50%
e. Alternative recommendations, Hydraulics/hydrostatic system: Qualube Extremol FS 10W30 / Qualube Endurasyn SS 10W-30 / Qualube Agri - Supreme 10W30; Qualube Endurol 15W40 / Qualube Eurofleet 15W40 / Qualube Endurasyn SS 10W-40

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (D / DT)
Hours Max 250
Transmission
Hours Max 1000
Final Drives (each)
Hours Max 1000
Coolant
Hours Max 3000
Hydraulics
Hours Max 1000