Close Print
Application
Recommendation
Capacity (ltr)
Engine (D / DT)
Product 1
 Qualube Endurol 15W40 (a)
10.0
Product 2
 Qualube Eurofleet 15W40
Product 3
 Qualube Endurasyn SS 10W-40
Rear Axle
Product 1
 Qualube LS HD EP 90
5.5
Product 2
 Qualube LS HD EP 80W90
Transmission
Qualube ATF Type G
18.3
Front Axle
Product 1
 Qualube LS HD EP 90 (b)
5.5
Product 2
 Qualube LS HD EP 80W90
Coolant
Product 1
 Qualube Qualguard Si-OAT Coolant (c, d)
13.5
Product 2
 Qualube Universal Antifreeze
Product 3
 Qualube Qualguard ORATEC Coolant
Brake Fluid
Product 1
 Qualube Hydraulic HM10
Product 2
 Qualube Hydrapower HV10
Hydraulics
Product 1
 Qualube Hydraulic HM32 (e)
170
Product 2
 Qualube Hydrapower HV32
General Grease Points
Product 1
 Qualube Lithium EP 2
Product 2
 Qualube Lithium Complex 2
Boom slides/wear pads
Product 1
 Qualube Lithium Complex Moly EP2M
Product 2
 Qualube Pin & Bush Grease
Product 3
 Qualube LM2 Grease
Hubs
Product 1
 Qualube LS HD EP 90
4.5
Product 2
 Qualube LS HD EP 80W90

Lubricant / Capacity Notes

a. CDSE also suitable for naturally aspirated engines
b. Drop box (where fitted): Factory fill as axles. Qualube Syntogear TDL 80W90 / Qualube SS 75W90 / Qualube Syntogear FS TDL 75W90 also suitable
c. Liquid cooling systems. Use Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant at a concentration of 50% or one part Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant with one part water
d. Mix ratio, 50%
e. Preferred hydraulic oil viscosity for all models: Qualube Hydraulic HM46 / Qualube Hydrapower HV46 / Qualube Enviroyl Hydrasyn XT46 (1997 onwards)

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (D / DT)
Hours Max 250
Rear Axle
Hours Max 1000
Transmission
Hours Max 500
Front Axle
Hours Max 500
Coolant
Months Max 24
Brake Fluid
Hours Max 2000
Hydraulics
Hours Max 1000
Hubs
Hours Max 1000

Copyright © OATS Ltd. 2024