Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D / DT)
|
Product 1
|
Qualube Endurol 15W40 (a) |
10.0
|
Product 2 |
Qualube Eurofleet 15W40 | ||
Product 3 |
Qualube Endurasyn SS 10W-40 | ||
|
Rear Axle
|
Product 1
|
Qualube LS HD EP 90 |
5.5
|
Product 2 |
Qualube LS HD EP 80W90 | ||
|
Transmission
|
Qualube ATF Type G |
21.0
|
|
|
Front Axle
|
Product 1
|
Qualube LS HD EP 90 (b) |
5.5
|
Product 2 |
Qualube LS HD EP 80W90 | ||
|
Coolant
|
Product 1
|
Qualube Qualguard Si-OAT Coolant (c, d) |
13.5
|
Product 2 |
Qualube Universal Antifreeze | ||
Product 3 |
Qualube Qualguard ORATEC Coolant | ||
|
Hydraulics
|
Product 1
|
Qualube Hydraulic HM32 (e) |
91.0
|
Product 2 |
Qualube Hydrapower HV32 | ||
|
General Grease Points
|
Product 1
|
Qualube Lithium EP 2 |
|
Product 2 |
Qualube Lithium Complex 2 | ||
|
Boom slides/wear pads
|
Product 1
|
Qualube Lithium Complex Moly EP2M |
|
Product 2 |
Qualube Pin & Bush Grease | ||
Product 3 |
Qualube LM2 Grease | ||
|
Hubs
|
Product 1
|
Qualube LS HD EP 90 |
4.5
|
Product 2 |
Qualube LS HD EP 80W90 | ||
| a. | CDSE also suitable for naturally aspirated engines |
| b. | Drop box (where fitted): Factory fill as axles. Qualube Syntogear TDL 80W90 / Qualube SS 75W90 / Qualube Syntogear FS TDL 75W90 also suitable |
| c. | Liquid cooling systems. Use Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant at a concentration of 50% or one part Qualube Qualguard Si-OAT Coolant / Qualube Universal Antifreeze / Qualube Qualguard ORATEC Coolant with one part water |
| d. | Mix ratio, 50% |
| e. | Preferred hydraulic oil viscosity for all models: Qualube Hydraulic HM46 / Qualube Hydrapower HV46 / Qualube Enviroyl Hydrasyn XT46 (1997 onwards) |
There are no notes to display for this model
| Hours Max | 250 |
| Hours Max | 1000 |
| Hours Max | 500 |
| Hours Max | 500 |
| Months Max | 24 |
| Hours Max | 1000 |
| Hours Max | 1000 |
Copyright © OATS Ltd. 2024